It is apparent that PPy nanotube electrode structure offers improved access to the ions through the tube interior in addition to exterior regions which are accessed equally by
all three electrodes. Figure 7A, B shows CV plots measured at scan rates of 5 to 100 mV.s-1 for the PPy nanotube electrodes obtained after etching of ZnO nanorods at the core for 2 and 4 h, respectively. The increase in the current with the scan rate indicates the kinetics of the faradic process and the electronic-ionic transport at the PPy nanotube-electrolyte interface. It is easy to observe from Figure 7 that more open PPy nanotube electrodes after 4-h ZnO etch show higher anodic and cathodic current at every scan rate as compared to the 2-h etched electrodes in the same potential window. Although both electrodes showed good charge propagation capabilities, the www.selleckchem.com/screening/inhibitor-library.html difference in the current Belnacasan in vitro density of the electrodes is attributed to the structural changes due to etching. The CV plots show that though rectangular shape is nearly preserved as the scan rate is increased until 50 mV.s-1, a Selumetinib cell line general trend is a progressively narrower and slightly oblique-angled CV plot for scan rate of ≥50 mV.s-1. The factors responsible for such a behavior are the contact resistance and the delayed response time of
the faradic reactions nonsynchronous with the faster scan which otherwise would have boosted the total capacitance. Figure 6 Cyclic voltammetric plots of the electrode with nanostructured ZnO nanorod core-PPy sheath. PPy nanotube after etching away ZnO nanorods for 2 and 4 h measured at scan rates (A) 5 mV.s-1 and (B) 10 mV.s-1. Figure 7 Cyclic voltammetric plots of PPy nanotube electrodes measured at different scan rates. (A) 2-h etch and (B) 4-h etch. The growth in
current density Rucaparib order of the PPy nanotube electrodes with the increasing scan rate as shown in Figure 7 is reflective of the dissimilarities in terms of the porosity of the nanotube structure and improved performance of the 4-h etched PPy nanotube electrode. The rise in the cathodic peak current density J PC with scan rate, ν, follows the Randles-Sevcik equation, (3) where F is the Faraday number and R is the ideal gas constant. The active specie concentration in electrolyte is denoted by c, and the number of electron-involved reduction processes by n. The parameter D represents the apparent charge transfer coefficient by diffusion. A linear plot of the current shown in Figure 8 for 2- and 4-h ZnO core etched PPy nanotube electrodes suggests that according to the Randles-Sevcik formulation the charge transport process is diffusive-controlled. Figure 8 shows that compared to the 2-h etched electrode, 4-h etched PPy nanotube electrode has a higher slope which suggests that in this electrode the electrolyte ions are more easily accessible due to the presence of higher diffusivity paths through interconnected nanotubes and therefore have improved ability to store charges.